Q. How do I Get my Printer Out of Deep Sleep Mode?
printersupportplus

How do I Get my Printer Out of Deep Sleep Mode?

Step by Step Guide on How do I Get my Printer Out of Deep Sleep Mode

Firstly, to get your Printer out of its Deep Sleep Mode, you’ll have to know what Deep Sleep Mode basically is. If your printer enters the deep sleep mode then it means that it is consuming less power and it is on standby mode. It is a factory-built setting on your printer for the long life of the printer and for maintaining a minimum power consumption.

If your printer enters into a deep sleep mode, and you are wondering about how to get it out of that mode as you need to use the printer on an urgent basis, no worries. You can easily do this with the help of the points given below;

Get Your Printer Out of Deep Sleep Mode:

The points below will help you get your printer out of deep sleep mode;

  • First of all, you have to open the main menu and go to “General Setup”.
  • Over there, you’ll find many options.
  • The one you need to go to now is the “Ecology Section” which stands for power consumption.
  • Locate and go to the “Sleep Time” option on the following menu.
  • Now, press both the power on and the power off button of the printer together.
  • After a while, the screen will showcase whether to remain idle or turn off the deep sleep mode.
  • On the same page, you can also set the timer for deep sleep mode.

Therefore, with the help of the above-mentioned guides, one can easily turn off the deep sleep mode and can get Printer Tech Support in a hassle-free manner.


#how to get #out of deep #sleep mode #printer
1

Answer

10

Views

28

May, 2021

Hardware and networking
 3.5 q
1 Answer
  • nurkeyo

    hi was just seeing if you minded a comment. i like your website and the thme you picked is super. I will be back.house


       

    answered by

      0.38 q

Asked in Category

Hardware and networking

The screen on which you are reading now is a piece of hardware and you could access this web content because of networking. Earlier the hardware designs were prepared to suffice the functional requirements of the device. On the contrary, in recent times, look and feel of the device is equally considered. With the advancements in the field of science like Nano-technology, more compact electronic and hardware equipment are developed. Networking is what binds different hardware devices in a linked system through which internal communication is made possible.

  • 10 views overall.
  • Asked on