How Do I Fix the Error Code 0x97 on Epson Printer?

If you have an Epson printer and are encountering error code 0x97, you need not Panic. You can try the following troubleshooting steps to fix the error.

Various Methods to Troubleshoot Error Code 0x97

Disconnect Everything from the Printer:

• Cancel the print task, if any, and remove all the paper jams from your printer.
• Disconnect all the cables, including the ink Cartridge.
• Press and hold the power button of the printer for one minute.
• Now printer a test document and again press the power button.
• Now it’s time to re-install the Epson ink Cartridges and plug your Printer again.

Reset Your Printer:

• To reset the printer first step is to disconnect all the cables.
• Now you need to press and hold the power button, meanwhile reconnecting all the cables and then releasing.
• Now it’s time to conduct a test print.

Clean the Printhead:

A dirty and clogged printhead often also creates a problem in printing and causes the error code 0x97. If it happens, you can clean the printhead properly to fix the issue.

So, using the above methods, you can fix the Epson Error Code 0x97 anytime. Besides, you can also speak to the technician team if the problem persists.

Reasons for Brother Printer Not Communicating With Computer

Printers have become an important part of everyone’s lives. If you want to work while sitting at home or have academic work, you will need a printer. Lately, many users have been asking why the Brother printer is not connected to their computer. This article has the answer to this question along with simple solutions.

Why Brother printer is not communicating with the computer?

• Printer driver: The driver you are using to install the printer is not supporting the software. For this, you need to update the driver or reinstall it.
• Wired connections: The cables you use to connect the printer might be lost sometimes. Make Sure that you have connected your Brother printer with all the cords properly.
• Wireless connections: If your printer is connected to your computer with WiFi, you need to check the settings in your PC. for this, you have to open Settings in Device and Printers and connect to a strong network.
• Paper jam or low ink: There are times when paper gets stuck in the printer, so make sure that all the papers are properly placed, and the cartilage has full ink.

There are some common issues of why Brother printers not communicating with computer. You can check the above-stated solutions to fix the issue. If you still face the same problem, you can contact the technician team of Brother printer not communicating with the computer.

A Quick Guide To Wirelessly Print Items From Your Brother Printer

Are you facing trouble with your Brother printer? Is it not able to print your desired items wirelessly? Well, Brother printer users often face such situations. However, this issue generally occurs due to an incorrect internet connection setup. But one can still fix it without any hassle. Therefore, read this post further and get to learn about setting up a wireless connection between your PC and Brother printer. Also, if you don’t find the information helpful, then you can contact the technician at Brother for further assistance.

Steps To Print Wirelessly From Your Brother Printer

Follow the steps mentioned below to set up a wireless connection with your Brother printer and PC use it to print items.

• At first, make sure that you have turned on your Brother printer, and then hit the Menu option on your printer’s control panel.
• Next, use the navigation buttons on the control panel to navigate to the Network section, and then select WLAN.
• Now, select Setup Wizard, then press OK to see the WLAN Enable Message.
• Next, select Yes to enable the wireless connection on your device, then your Brother printer will search for the available networks.
• Next, use the Up or Down arrow buttons to pick your wireless network name, then press the OK button to enter the network password.
• Now, again OK button to confirm the successful connection, then you can see the Connected message.
• Finally, you can now use the Brother application to print your items.

Furthermore, if still your Brother printer connected to wifi but not printing, then you get in touch with the technician experts at Brother printer and get their assistance. They’ll surely guide you with the best solutions and information and ensure a better printing experience.

How To Update My Zebra Printer Firmware?

Zebra printer is a fantastic service that is used by various users to finish digital work. These printers come in different forms which can be operated from various devices. However, these printers sometimes do not work as per expectation. The most common cause of this is the outdated software of this printer for which one needs to perform the troubleshooting task.

Method Of Updating The Software Of Zebra Printer

This method involves you checking the firmware that is already installed on your printer. See the configuration label to know about the current Firmware version.

• Move to the official website of Zebra printers and go to the Support & Downloads section.
• According to the model number of your printer, select the most updated version of the firmware.
• Download that firmware to the device that is connected to your printer for sending files to it.
• Now, open the Zebra Setup Utility file on your device and choose your printer on it.
• Click on the Open Printer Tools button and move to the Action tab there.
• Select the Send File button and choose the Firmware file carefully in your browser box.
• Now, click on the Send button to finish this version of the firmware up-gradation process.

With this, you will be able to easily accomplish the goal of troubleshooting the software update process. This technician is extremely easy and anyone can easily achieve the target of Zebra Printer Troubleshooting through the online method. If you are facing any problem and need assistance in resolving that technical issue, use the method to connect with its repair team.

A Comprehensive Guide on How You Can Set up Canon MX922 Wireless Printer

Do you want to set up your Canon MX922 wireless printer? It is an easy task and you can set up your printer on your own without any assistance. To know how you can set up your Canon printer, you may read this guide further.

How to Set up the Canon MX922 Wireless Printer?

• To set up your Canon wireless printer, you may follow the steps given below:
• First of all, you need to check whether the printer is on or not. If not, then you need to switch ON the printer first.
• Now, you will find a Menu button on the operational panel of the printer. You need to press the button.
• Now you need to select the WLAN setup using the arrow button and then hit the OK button.
• Now if a compatible access point is found, then you need to press the WPS button and hold it for at least 5 seconds.
• Now you need to press the OK button present on your printer’s operational panel.
• Now, when you see the Connected to the access point pop-up, then you need to press the OK button again.
• Now, your printer is connected to your WiFi network and is ready to be used.

You can follow the above-given steps again if you fail to complete the Canon Printer Setup in one go. If you again fail to set up the printer, then you can try it again after rebooting your Canon printer. For this, you need to turn off the printer and unplug it from the power source. Then you need to connect it again and then try to set up the printer. You can also contact a technician to seek assistance in setting up your Canon printer.

How to Reset the Epson Printer After Refilling?

Wondering about how to reset your Epson printer after refilling? Well, you have come to the exact right place. We are here to provide information that is going to help you with resetting your Epson printer. So stay tuned and follow until the end; without any further ado, let us get straight into this.

What are the Steps that one Needs to Go in Order to Reset the Epson Printer After Refilling?

The steps that one needs to stick to in order to reset the Epson printer after refilling are as follows;

• First and foremost, the users are required to press or select the Home button.
• Next, the users are required to select the up or down arrow button. This will allow you to select the Setup option from where you can easily navigate to the ‘Maintenance’ option and then finally reach the Reset Ink levels option.
• Now, you are required to press one of the Start buttons and then finally press the ‘Ok’ option.
• The right and left arrow button is yet another thing that the users are required to select in order to highlight the ink tank that you have refilled. In order to select it, you will have to click on the ‘OK’ option.
• Repeat this step for each tank that has been refilled.
• Now, select and press one of the start buttons that are required to reset the ink levels. Hit the ‘OK’ option once the reset is complete.

These are steps that will allow users to reset the Epson printer after refilling. I hope the inclusions of this paper have clearly answered How do I reset my Epson printer?

Is There Any Reset Button On Brother Printer?

Yes, there is a reset button on the Brother printer that works to restore the normal operation of the device. The presence of this function is really important as it allows you to make use of flawless printing services. However, many users are unaware of the process which they can use to reset their printer.

How To Reset The Brother Printers?

Resetting Brother printers can be easily achieved by pressing its button in an acceptable series. Here is how you can accomplish the goal to reset your printer.

• First of all, press the Menu button on your printer to start the resetting process.
• Click on the Up or Down button to open the initial setup and Press OK.
• Now, Use the Up or Down button to display and use the Reset option.
• Next, use the Up or Down button to choose the reset type that you want to use.
• In the end, employ the Up or Down key again to reset the machine and press OK.

Alternative Method to Reset Brother Printer

• Start by pressing the green Power key for turning off the printer.
• Choose the Go button and simultaneously press the Power key.
• Release after 5 seconds when 3 orange lights flash on it.
• Press the power button again for 8 to 9 times constantly.
• A green light will blink and after 10 seconds the reset will complete.

After this give print command and you check out the increased speed of your printer. Many users are still thinking about how do I reset my Brother printer. They should consider the option of contacting the official support of Brother printers to gain valid and official details about the resetting process.

Step by Step Guide on How do I Get my Printer Out of Deep Sleep Mode

Firstly, to get your Printer out of its Deep Sleep Mode, you’ll have to know what Deep Sleep Mode basically is. If your printer enters the deep sleep mode then it means that it is consuming less power and it is on standby mode. It is a factory-built setting on your printer for the long life of the printer and for maintaining a minimum power consumption.

If your printer enters into a deep sleep mode, and you are wondering about how to get it out of that mode as you need to use the printer on an urgent basis, no worries. You can easily do this with the help of the points given below;

Get Your Printer Out of Deep Sleep Mode:

The points below will help you get your printer out of deep sleep mode;

• First of all, you have to open the main menu and go to “General Setup”.
• Over there, you’ll find many options.
• The one you need to go to now is the “Ecology Section” which stands for power consumption.
• Locate and go to the “Sleep Time” option on the following menu.
• Now, press both the power on and the power off button of the printer together.
• After a while, the screen will showcase whether to remain idle or turn off the deep sleep mode.
• On the same page, you can also set the timer for deep sleep mode.

Therefore, with the help of the above-mentioned guides, one can easily turn off the deep sleep mode and can get Printer Tech Support in a hassle-free manner.

What to Do When the Canon Printer Device is in the Error State? Seek Fundamental Clue to Fix

It is pretty common to conflict with any kind of printer device during printing the documents at your shop, office, or home. In the same way, if your Canon Printer is not responding and went off in the error state, you must browse the causes of this issue promptly. It has been observed that when you find something wrong between the connectivity of the computer and printer device, you are required to restart both the devices can lead to finding the solution in no time.

Nonetheless, if you are noticing the same error state with your Canon Printer device, you are required to troubleshoot your printer device and come over this bug expeditiously.

Possible Causes of the Issue:

• Check the connection between printer and computer device.
• WI-FI connection with both the devices.
• Make sure, installing a compatible printer drive, etc.

It is mandatory to catch a cause of the issue that will assist you to get a solution soon. Let’s fix it using step by step procedure.

• At first, make some port settings changes and press the Window+R key and type devmgmt.msc to open device manager.
• Make sure your printer is connected and then reinstall the driver downloading the latest version of the printer driver.
• Set a printer spooler and service to run your device automatically and update your Windows or scan it and turn on your printer device after removing the error state eventually.

For further assistance regarding the Canon Printer Troubleshooting task, feel free to contact the printer repair technician that is available to assist you at your desired moment appropriately.

How to Fix My Computer Can’t Find My Brother Printer?

Trying to connecting your Brother printer to your computer wirelessly or using a USB cable? But your computer is not capable to find your Brother printer? Then you are not alone in getting this problem with your printer as the thousands of Brother printer users confront this problem once in a while. There can be too many possible reasons behind the computer not finding your Brother printer issue and if you don’t know how to resolve this issue, then you can simply go through the troubleshooting steps to fix the Brother printer issue.

Troubleshooting Steps to Resolve If a Computer not Finding Brother Printer:

• First of all, you should check whether your Brother printer is powered on or not and you should also check if there is any kind of error.
• Now you need to download the Network Utility Tool on your computer and then run it once it downloads.
• You should check the printer driver in your computer because due to the faulty drivers, you may also get such kind of situations.
• Make sure that there is no connection between your Brother printer or computer because you may face connection issues if any other printer will be connected with your computer.
• You can also reset your Brother printer to the original settings and then check whether you are capable to connect or not.

With the help of the above-described Brother Printer Troubleshooting steps, you will be capable of resolving this issue of your printer in a very simple way. But if your computer is still not finding the Brother printer or you need any other assistance, then you should contact the technician team.